Diamond Recorder || Setting Up Motion Recording || Local GUI
Log into the system by entering the username and password.
After logging in, right click on the screen and select “Menu”
On the Alarm page, select Video Detection, and then select Motion Detection.
On the Video Detect page, you will select the channel you would like to work on, then make sure motion detection is highlighted as Enabled. Select the Region setting to confirm the area where motion detection will be covered in the image (colored areas are actively looking for motion. Clear areas ignore motion.). You can set a schedule under Schedule. Press Apply after configuring each camera.
PLEASE NOTE: For the Video Detection > Motion Detection section, you configure each channel separately. DO NOT choose Copy To on this page.
Related Articles
Diamond Recorder || Setting Up Recording Schedules || Local GUI
Log into the system by entering the username and password. After logging in, right click on the screen and select “Menu” On the Main Menu page, select Storage After selecting Storage, select Schedule and this will take you to the page where you will ...Diamond Recorder || Recorder Start Up Wizard || Local GUI
1. When you first turn on the recorder you will be greeted with the region settings. Click on the drop down menu and select "United States" and click Next. 2. Select the proper time zone setting for your region. 3. You will now be prompted to input a ...Diamond Recorder || Setting Up Audio Recording for DVR || Local GUI
Enable audio source 1. Login using a web browser. 2. Click on Setting > Camera. 3. Click on Encode. And then select the camera channel that support audio. 4. Click on More and checkmark to enable Audio. 6. Select the Audio source for your HD-CVI ...Emerald Recorder || Motion Recording Configuration || Local GUI
1. On the NVR menu, select the Alarm tab located on the top. 2.On the alarm menu, select Motion located on the left. -Select a camera for motion recording -ensure to click on Enable -On this page you can configure settings such as( trigger actions, ...Diamond Recorder || Setting Up Alarm Recording || Local GUI
Setup Alarm Input From main menu, click on Alarm. Click on Alarm-in Port. We are using XVR 72 series for this example. Select the Alarm input number that you like to use. This number is correspond to the alarm port on the back of recorder. 1. Click ...