ENS Recorder || Configuring Motion Detection || Local GUI
Log into the system.
Once logged in, move the mouse to the top center area and click the “arrow-like” button for the main menu access.
After selecting the Menu, select the Storage tab.
After selecting the Storage menu, select the Event tab.
When selecting the Event tab, you will be taken directly to the motion detection configuration page for the camera. Please select the camera that will need the motion detection adjustments and confirm that the checkbox next to enabled is marked. And you may adjust the motion sensitivity on the right-hand side of the page.
Anywhere with the red grid will trigger motion detection alarms. You may clear the screen, then click and drag the grid if there needs to be a custom area set for the motion detection trigger. Make sure you hit “Apply” after customizing the motion area.
You may also modify the schedule of motion detection under “Arming Schedule” tab.
Then you may enable the optional reactions along with the motion triggering, such as send email, buzzer, or trigger local alarm output, under Linkage Action tab.
Related Articles
ENS Recorder || Configuring Intrusion Detection || Local GUI
Log into the system. Once logged in, move the mouse to the top center area and click the “arrow-like” button for the main menu access. In the Main Menu, select the storage tab. After selecting the Storage menu, select the Event tab. When selecting ...ENS Recorder || Configuring Intrusion Detection || Web GUI
***Please Note: This process will ONLY work with ENS Series cameras*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the ...ENS Recorder || Configuring Line Crossing || Local GUI
Log into the system. Once logged in, move the mouse to the top center area and click the “arrow-like” button for the main menu access. In the Main Menu, select the storage tab. After selecting the Storage menu, select the Event tab. When selecting ...ENS Recorder || Configuring Line Crossing || Web GUI
***Please Note: This process will ONLY work with ENS Series cameras*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the ...ENS Recorder || Configuring the Buzzer and Alarms || Local GUI
Log into the system. Once logged in, move the mouse to the top center area and click the “arrow-like” button for the main menu access. After selecting the System menu, select the Storage tab. When selecting the Event tab, you will be able to select ...