UNV Recorder || How to add a user for Uniview recorders (Local GUI)
Uniview: Add a User (Local GUI)
Log into your Uniview recorder and enter the main menu.
Select System and then click on User.
Click on Add to begin creating a new user.
Enter the new user information. (You can enable Pattern unlocking here.) Then click OK.
Your new user has now been created.
Related Articles
UNV Recorder || How to add a user for Uniview recorders (Web GUI)
Uniview: Add a User (Web GUI) From your recorder’s web interface, log into your Uniview recorder. Select Setup. Select User. Click on Add to begin creating a new user. Select Save. Your new user is now created.Emerald Recorder || Recorder Add User || Local GUI
1. In the menu ,select the system tab. 2. Once in the system menu, select the user tab located on the left panel. 3. In the user Menu, select the add button located at the bottom. 4. In the pop up menu, type in user name and select user type. The ...Diamond Recorder || How to Add User || Local GUI
1. Click the Setting icon in the top left of the page 2. Select Account 3. Click on Add 4. The Add User menu will appear. Use this window to fill out full user details User Name Password Group - user can be set to a User account group for multiple ...UNV Recorder || IPC Initialization || Local GUI
*** Please Note: A Uniview NVR and Camera that is plugged directly into the recorder’s internal POE switch will be plug and play by default.*** Log into the system by entering the username and password. Default credentials are admin for the username ...UNV Recorder || Record audio on a Uniview NVR (Web GUI)
Record audio on a Uniview NVR NOTE -This guide assumes you have already enabled audio on the IP cameras with a microphone. 1. After logging into the web interface of the NVR go to Setup->Camera->Schedule. 2. Select the camera you want to enable audio ...