UNV Recorder || How to add a user for Uniview recorders (Web GUI)

UNV Recorder || How to add a user for Uniview recorders (Web GUI)

Uniview: Add a User (Web GUI)

From your recorder’s web interface, log into your Uniview recorder.

 

Select Setup.

 

 

 

 

Select User. Click on Add to begin creating a new user.

Select Save.

Your new user is now created.

    • Related Articles

    • UNV Recorder || How to add a user for Uniview recorders (Local GUI)

      Uniview: Add a User (Local GUI) Log into your Uniview recorder and enter the main menu. Select System and then click on User. Click on Add to begin creating a new user. Enter the new user information. (You can enable Pattern unlocking here.) Then ...

    • UNV Recorder || Record audio on a Uniview NVR (Web GUI)

      Record audio on a Uniview NVR NOTE -This guide assumes you have already enabled audio on the IP cameras with a microphone. 1. After logging into the web interface of the NVR go to Setup->Camera->Schedule. 2. Select the camera you want to enable audio ...

    • UNV Recorder || HC121 UNV LPR Email Notification Setup || Web GUI

      From NVR WEB GUI Step 1. Go to Smart > Vehicle Detection > Plate List > Add (you can name the group what you like) Add plate numbers to this group for white list (or any other created group) Step 2. Select Monitoring Tab UN-HC121@TC-08S-Z UNV LPR ...

    • UNV Recorder || IPC Initialization || Web GUI

      Please note: A Uniview NVR with Uniview cameras plugged into the internal POE of the recorder will essentially be plug and play. By default, cameras have DHCP enabled, however, when plugged into the back the NVR, it will receive a static IP address. ...

    • UNV Recorder || How to Set Up EZCloud || Web GUI

      To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...