Akuvox Local || (A01/A02S/A03) Volume Configuration Settings

Akuvox Local || (A01/A02S/A03) Volume Configuration Settings

(A01/A02S/A03) Volume Configuration Settings

Volume and tone configuration include microphone volume, the AD volume, keypad volume, speaker volume, tamper alarm volume, and open-door tone configuration. Moreover, you can upload the tone you like to enrich your personalized user experience.

Volume Configuration

You can configure the Mic volume according to your need for open-door notification. Moreover, you can also set up the tamper alarm volume when unwanted removal of the access control terminal occurs.

To configure the configuration on web Device > Audio > Volume Control interface.

Parameter Set-up:

  • Tamper Alarm Volume: set the tamper alarm volume from 0-15 according to your need. The default volume is 8.

  • Prompt Volume: set the voice prompt volume from 0-15 according to your need. The default volume is 8.

  • Keypad Volume: adjust the volume of the keypad. The default volume is 8.

    • Related Articles

    • Akuvox Local || (E12W) Volume and Tone Configuration

      (E12W) Volume and Tone Configuration Volume and tone configuration include microphone volume, speaker volume, tamper alarm volume, and open-door tone configuration. Moreover, you can upload the tone you like to enrich your personalized user ...

    • Akuvox Local || How to Backup EC33 Configuration Settings

      How to Backup EC33 Configuration Settings You can back up the configuration file by exporting it to your local PC. You can use the file to restore your configuration if needed. Navigation Path: System > Others.

    • Akuvox Local || RTSP configuration

      All Akuvox Doorphones that have cameras support RTSP. Akuvox RTSP string - rtsp://X.X.X.X/live/ch00_0 Setting up RTSP on Android based doorphones Step 1: Log into the device using the local IP. Default is admin / admin. Step 2: Navigate to Intercom ...

    • Akuvox Local || (A0x)Network Settings

      (A0x)Network Settings You can configure the default DHCP mode (Dynamic Host Configuration Protocol) and static IP connection. Moreover, you can set up an IP address, Subnet Mask, Default Gateway, and DNS servers. To configure it on web Network > ...

    • Akuvox General || Control4 - Akuvox Communication Settings

      Control4 - Akuvox Communication Settings 1. Call group Go to Agents interface and add Communication agent first. The default All call group is only with Control4 devices, like T3. Users can add new call group, like Call_to_C313_and_T3, and add C313 ...