Akuvox Local || (A0x)Network Settings
(A0x)Network Settings
You can configure the default DHCP mode (Dynamic Host Configuration Protocol) and static IP connection. Moreover, you can set up an IP address, Subnet Mask, Default Gateway, and DNS servers.
To configure it on web Network > Basic > LAN Port interface.
Parameter Set-up:
-
DHCP: DHCP mode is the default network connection. If the DHCP mode is selected, then the access control terminal will be assigned by the DHCP server with IP address, subnet mask, default gateway, and DNS server address automatically.
-
Static IP: 2hen static IP mode is selected, the IP address, subnet mask, default gateway, and DNS servers address must be manually configured according to your actual network environment.
-
IP Address: set up the IP Address if the static IP mode is selected.
-
Subnet Mask: set up the subnet mask according to your actual network environment.
-
Default Gateway: set up the correct gateway default gateway according to the IP address of the default gateway.
-
Preferred/Alternate DNS Server: set up preferred DNS/Alternate DNS Server (Domain Name Server) according to your actual network environment. Preferred DNS Server is the primary server address while the Alternate DNS Server is the secondary one, and the access control terminal connects to the secondary server when the primary server is unavailable.
Related Articles
Akuvox Local || SDMC: SIP Settings
SDMC: SIP Settings You are required to configure SIP settings for the SDMC before you can make SIP calls from SMDC to the devices. Click System > SIP Settings. Configure the SDMC SIP settings. Field Name Description Field Name Sub-field Name ...Akuvox Local || RTSP configuration
All Akuvox Doorphones that have cameras support RTSP. Akuvox RTSP string - rtsp://X.X.X.X/live/ch00_0 Setting up RTSP on Android based doorphones Step 1: Log into the device using the local IP. Default is admin / admin. Step 2: Navigate to Intercom ...Akuvox Local || EC33 RS485 Settings
EC33 RS485 Settings EC33 is scalable from 32 floors to 64 floors by enhancing it with an extra control board via the RS485 interface. You can either choose RS485A or B interface for the application. When you select Expansion Board, then the ...Akuvox Local || EC33 Wiegand Settings
EC33 Wiegand Settings EC33 can be connected to third-party devices such as card readers via Weigand. You set the Wiegand setting based on the technical specification of the third-party device for the integration. Navigation Path: Setting > Wiegand. ...Akuvox Local || How to Backup EC33 Configuration Settings
How to Backup EC33 Configuration Settings You can back up the configuration file by exporting it to your local PC. You can use the file to restore your configuration if needed. Navigation Path: System > Others.