Akuvox Local || EC33 Wiegand Settings

Akuvox Local || EC33 Wiegand Settings

EC33 Wiegand Settings

EC33 can be connected to third-party devices such as card readers via Weigand. You set the Wiegand setting based on the technical specification of the third-party device for the integration.

Navigation Path: Setting > Wiegand.

  • Wiegand Display Mode - select the same Wiegand card code display format as that of the third-party device (8H10D; 6H3D5D; 6H8D; 8HN; 8HR; RAW, 8HR10D).

  • Wiegand Card Reader Mode - select the same Wiegand data transmission format as that of the third-party device (Wiegand 26,34,58).

  • Wiegand Transfer Mode -it is invariably input because E33 receives the data from the third-party card reader.

  • Wiegand Input Data Order - select the Wiegand input data sequence (Normal, Reversed). Select Normal for the normal data sequence, and Reversed for the reversed order.

    • Related Articles

    • Akuvox Local || A092: Device and DoorStrike setup Through Wiegand || Installation

      Akuvox A092 Device and DoorStrike setup Through Wiegand If installing a door strike to A092 Controller with a doorbell that has either a door strike or mag lock and a user does not want to utilize an Action URL, they must then wire the doorbell ...

    • Akuvox Local || EC33 RS485 Settings

      EC33 RS485 Settings EC33 is scalable from 32 floors to 64 floors by enhancing it with an extra control board via the RS485 interface. You can either choose RS485A or B interface for the application. When you select Expansion Board, then the ...

    • Akuvox Local || How to Backup EC33 Configuration Settings

      How to Backup EC33 Configuration Settings You can back up the configuration file by exporting it to your local PC. You can use the file to restore your configuration if needed. Navigation Path: System > Others.

    • Akuvox Local || SDMC: SIP Settings

      SDMC: SIP Settings You are required to configure SIP settings for the SDMC before you can make SIP calls from SMDC to the devices. Click System > SIP Settings. Configure the SDMC SIP settings. Field Name Description Field Name Sub-field Name ...

    • Akuvox Local || (A0x)Network Settings

      (A0x)Network Settings You can configure the default DHCP mode (Dynamic Host Configuration Protocol) and static IP connection. Moreover, you can set up an IP address, Subnet Mask, Default Gateway, and DNS servers. To configure it on web Network > ...