Akuvox Local || EC33 RS485 Settings

Akuvox Local || EC33 RS485 Settings

EC33 RS485 Settings

EC33 is scalable from 32 floors to 64 floors by enhancing it with an extra control board via the RS485 interface. You can either choose RS485A or B interface for the application. When you select Expansion Board, then the selectable floor range will be changed from 32 to 64 in the access control schedule. None is the default setting you choose to disable the function.

    • Related Articles

    • Akuvox Local || EC33 Wiegand Settings

      EC33 Wiegand Settings EC33 can be connected to third-party devices such as card readers via Weigand. You set the Wiegand setting based on the technical specification of the third-party device for the integration. Navigation Path: Setting > Wiegand. ...

    • Akuvox Local || How to Backup EC33 Configuration Settings

      How to Backup EC33 Configuration Settings You can back up the configuration file by exporting it to your local PC. You can use the file to restore your configuration if needed. Navigation Path: System > Others.

    • Akuvox Local || SDMC: SIP Settings

      SDMC: SIP Settings You are required to configure SIP settings for the SDMC before you can make SIP calls from SMDC to the devices. Click System > SIP Settings. Configure the SDMC SIP settings. Field Name Description Field Name Sub-field Name ...

    • Akuvox Local || (A0x)Network Settings

      (A0x)Network Settings You can configure the default DHCP mode (Dynamic Host Configuration Protocol) and static IP connection. Moreover, you can set up an IP address, Subnet Mask, Default Gateway, and DNS servers. To configure it on web Network > ...

    • Akuvox Local || RTSP configuration

      All Akuvox Doorphones that have cameras support RTSP. Akuvox RTSP string - rtsp://X.X.X.X/live/ch00_0 Setting up RTSP on Android based doorphones Step 1: Log into the device using the local IP. Default is admin / admin. Step 2: Navigate to Intercom ...