Diamond IPC || Configuring IP Camera to Record to SD-Card

Diamond IPC || Configuring IP Camera to Record to SD-Card

  1. Download and install ConfigTool
  2. Run the Config Tool
    image-1644876804339.png
  3. The Config Tool should display your IP Camera. Click the, image-1644875945795.png icon to open Internet Explorer and access your IP Camera.
  4. Login with your username and password.

    image-1644877088963.png

  5. After logging in, Setting > Storage > Destination > Local.
    It should display the SD-Card.

    image-1644945584856.png

  6. Click "Format". Then click "Read & Write'"

    image-1645111784361.png

  7. Click "Path". Select "Local" for both "Record" and "Snapshot". Then click "Save'" when done.

    image-1645111913678.png

How to set overwrite when SD card is full

  1. Setting > Storage > Record Control. Select "Disk Full" as "Overwrite". Click "Save" when done.

    image-1644946037485.png

    • Related Articles

    • Diamond IPC || How to configure IP Camera to record to SD Card

      Access the camera’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: “http://xxx.xxx.xxx.xxx” (Note: If the HTTP port has been changed from default, you will need to add the ...

    • Emerald IPC || How to configure IP Camera to record to SD-Card

      Log onto the web interface for the camera Under setup go to storage on the left-hand side of the page Storage medium should be the SD card you've placed into the camera and make sure to format it to be able to use it. Allocate capacity is used for ...

    • Diamond IPC || Playback Video / Backup Video from IP Camera's SD-Card || Web GUI

      Download and install Config Tool Run the Config Tool The Config Tool should display your IP Camera. Click the icon to open Internet Explorer and access your IP Camera. Login with your username and password. Click on "Playback" On the right hand side ...

    • Titanium IPC || SD Card Recording and Playback || Web GUI

      To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...

    • Diamond CMS + Software || SmartPSS/Backup SD Card

      1. From the Home Page on SmartPSS select the “PlayBack Button” 2. From the PlayBack Page on the right hand side select “Camera or Channel” for the footage you need to backup. Multiple cameras or channels may be selected. 3 . Select "Record or ...