Diamond IPC || How to configure IP Camera to record to SD Card
Access the camera’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: “http://xxx.xxx.xxx.xxx” (Note: If the HTTP port has been changed from default, you will need to add the port number after the ip address by inserting a colon “:” in between the address and port number).
Login to the Camera
After we log in the Camera, go setting
Select storage, and Schedule in the sub menu. Set up the schedule for the General or Event(motion) recording schedule.
If you want to do motion recording, make sure you turn on the Motion Detection function.
Go setting, Event and Video Detection.
In this page you can enable Motion detection, set detection period and detection area.
You can manage where your record or snapshot is going to save at.
Select Storage, and Destination in the sub menu. Local meaning SD card you insert in the camera. You can format or check storage of SD-Card on Local sub-menu
Related Articles
Diamond IPC || Configuring IP Camera to Record to SD-Card
Download and install ConfigTool Run the Config Tool The Config Tool should display your IP Camera. Click the, icon to open Internet Explorer and access your IP Camera. Login with your username and password. After logging in, Setting > Storage > ...Emerald IPC || How to configure IP Camera to record to SD-Card
Log onto the web interface for the camera Under setup go to storage on the left-hand side of the page Storage medium should be the SD card you've placed into the camera and make sure to format it to be able to use it. Allocate capacity is used for ...Diamond IPC || Playback Video / Backup Video from IP Camera's SD-Card || Web GUI
Download and install Config Tool Run the Config Tool The Config Tool should display your IP Camera. Click the icon to open Internet Explorer and access your IP Camera. Login with your username and password. Click on "Playback" On the right hand side ...Titanium IPC || SD Card Recording and Playback || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...Diamond IPC || Viewing Snapshots From IP Camera's SD-Card || Local GUI
Download and install Config Tool Run the Config Tool The Config Tool should display your IP Camera. Click the, icon to open Internet Explorer and access your IP Camera. Login with your username and password. Click on Playback . Select "JPG" for File ...