Diamond IPC || Enable and Modify ONVIF on Diamond IPC || Web GUI

Diamond IPC || Enable and Modify ONVIF on Diamond IPC || Web GUI

ONVIF will typically be enabled, set to authentication, and will initialize with the password that the device was activated with. This guide will cover the various ONVIF settings.

Modify the ONVIF credentials

Log into the IPC and select "Setting"

image-1631648384416.PNG

Click "System" then "Account"

image-1631648446959.PNG

If you need to modify your ONVIF password:
Click "ONVIF User" then "Modify"

image-1631649358456.PNG

Enter the "Old Password" (password used to initialize the camera) and "New Password", then retype the desired password on "Confirm Password"
Press "Save"
Note: If the camera password does not take, please use "admin" as the old password.

image-1631649447015.PNG

You will receive a confirmation if it was successful

image-1631649525487.png

ONVIF Authentication

Select "Network", then "Access Platform"
Click the "ONVIF" tab and select "On" for Authentication.
Click "Save".

image-1631652093474.PNG

Enable/Disable the ONVIF function

Select "System" then "Safety"
Enable "Onvif Service"
Click "Save."

image-1631652145114.PNG

 

    • Related Articles

    • Diamond IPC || Enabling ONVIF || Web GUI

      This is a quick guide on how to find an enable ONVIF on a Diamond IPC. Step 1. Log into the IPC directly with the camera's IP address. NOTE: Default IP is 192.168.1.108. Step 2. Click on settings then find "Safety" from the "System" drop down on the ...

    • Diamond IPC || Setting Up Auto Tracking PTZ New Interface || Web GUI

      Diamond IPC || Setting Up Auto Tracking PTZ New Interface || Web GUI Begin by accessing the Web GUI of the PTZ camera and select the setting icon in the upper right of the web page. Select PTZ and adjust where you would like to set the home position ...

    • General || ONVIF

      What is ONVIF (Open Network Video Interface Forum)? ONVIF is a global open standard that allows IP based CCTV equipment from different manufacturers to communicate with each other. An example of ONVIF in action would be if you used a NVR from our ...

    • Titanium IPC || Enable/Disable Audio IPC (5.0.1) || Web GUI

      Click "Config" Click "Video/Audio" Click the "Audio" tab Toggle the Enable function to turn audio OFF and ON. Click "Save"

    • Diamond Recorder || How to disable stranger notifications || Web GUI

      Diamond Recorder || How to disable stranger notifications || Web GUI Login to the WEB Gui of recorder and look for “EVENT” on the main menu. Once selected, you will select the following: AI settings > Face Recognition > Stranger Alarm Select “Enable” ...