Diamond IPC || Enabling ONVIF || Web GUI

Diamond IPC || Enabling ONVIF || Web GUI

This is a quick guide on how to find an enable ONVIF on a Diamond IPC.

Step 1.
Log into the IPC directly with the camera's IP address.
NOTE: Default IP is 192.168.1.108.
diamondipconvif1.png

Step 2.
Click on settings then find "Safety" from the "System" drop down on the left side. Locate "ONVIF Service" and click the check box next to it. Make sure to hit "Save" after any changes are made.
diamondipconvif2.png
 

    • Related Articles

    • Diamond IPC || Enable and Modify ONVIF on Diamond IPC || Web GUI

      ONVIF will typically be enabled, set to authentication, and will initialize with the password that the device was activated with. This guide will cover the various ONVIF settings. Modify the ONVIF credentials Log into the IPC and select "Setting" ...

    • General || ONVIF

      What is ONVIF (Open Network Video Interface Forum)? ONVIF is a global open standard that allows IP based CCTV equipment from different manufacturers to communicate with each other. An example of ONVIF in action would be if you used a NVR from our ...

    • Diamond IPC || Setting Up Auto Tracking PTZ New Interface || Web GUI

      Diamond IPC || Setting Up Auto Tracking PTZ New Interface || Web GUI Begin by accessing the Web GUI of the PTZ camera and select the setting icon in the upper right of the web page. Select PTZ and adjust where you would like to set the home position ...

    • ENS IPC || Add IPC to 3rd party NVR || Web GUI

      Goal: Create ONVIF profile from IPC web interface. Steps: Configuration menu -> Network -> Advanced Settings -> Integration protocol (Set same password as IPC with "admin" authority.) Adding Camera to NVR as a ONVIF Protocol Make sure that when ...

    • Diamond IPC || How to Set P2P Function (WEB 5.0) ||

      This article provides a step-by-step guide for configuring the P2P (peer-to-peer) function on devices using the WEB 5.0 firmware. The instructions may vary slightly depending on the model and firmware version of your device. What is P2P? P2P ...