Diamond IPC || How to Set P2P Function (WEB 5.0) ||

Diamond IPC || How to Set P2P Function (WEB 5.0) ||

This article provides a step-by-step guide for configuring the P2P (peer-to-peer) function on devices using the WEB 5.0 firmware. The instructions may vary slightly depending on the model and firmware version of your device.

What is P2P?

P2P technology enables users to manage devices easily without requiring DDNS, port mapping, or a transit server. By scanning a QR code with your smartphone, you can add and manage devices on the mobile phone client.

Steps to Set P2P

Login to the Device

  • Access the device's web interface.
  • Enter your login credentials to gain access.
image.png

Navigate to Network Settings

  • Select Network from the main menu.
image.png

Access Platform Access

  • Go to Platform Access.
  • Select P2P.
image.png

Enabling P2P

Enable P2P

  • Check the box to enable P2P.
  • Once P2P is enabled, remote management of the device is supported.
  • When the device is connected to the network, the status will show as "online."

Information Collection

The IP address, MAC address, device name, and device SN will be collected for remote access purposes only.
You can uncheck the enable selection to stop the collection of this information.


Connecting with Mobile Phone Client

Login to Mobile Phone Client

  • Open the mobile phone client application.
  • Tap Device Management.

Add New Device

  • Tap the + icon at the upper-right corner.
  • Scan the QR code displayed on the P2P page of the device's web interface.

Complete the Setup

Follow the on-screen instructions on your mobile device to complete the P2P setup.
Link on how to add to DMSS: 
https://enssecurity-support.force.com/s/article/Diamond-Mobile-App-Adding-Device-to-DMSS-Mobile-App-Web-GUI

 

Additional Support

For further assistance, please contact our technical support team at support@enssecurity.com or call (888) 397-1999.

    • Related Articles

    • Diamond IPC || How to Set Up Maintenance Function (WEB 5.0) ||

      How to Set Up Maintenance Function (WEB 5.0) This article provides a step-by-step guide for configuring the maintenance function on devices using the WEB 5.0 firmware. The instructions may vary slightly depending on the model and firmware version of ...

    • Diamond IPC || How to Set EIS Function (Web 5.0) ||

      How to Set EIS Function (Web 5.0) This article provides a step-by-step guide for configuring the Electronic Image Stabilization (EIS) function on devices using the WEB 5.0 firmware. The instructions may vary slightly depending on the model and ...

    • Diamond IPC || How to Set Snapshot Function (WEB 5.0) ||

      How to Set Snapshot Function (WEB 5.0) This article provides a step-by-step guide for configuring the snapshot function on devices using the WEB 5.0 firmware. The instructions may vary slightly depending on the model and firmware version of your ...

    • Diamond IPC || How to Set PIR Function (WEB 5.0) ||

      How to Set PIR Function (WEB 5.0) This knowledge base article provides instructions on setting up the Passive Infrared (PIR) function for devices using the WEB 5.0 firmware. The PIR function detects motion based on infrared radiation, which is ...

    • Diamond IPC || How to Set Video Metadata Function (WEB 5.0) ||

      How to Set Video Metadata Function (WEB 5.0) This knowledge base article provides instructions on setting up the Video Metadata function for devices using the WEB 5.0 firmware. Video Metadata enhances surveillance capabilities by enabling the system ...