Diamond IPC || How to locate device on LAN via ConfigTool

Diamond IPC || How to locate device on LAN via ConfigTool

1. Locate ConfigTool on your computer. If not installed, please visit www.enssecurity.com to download.

2. Once installed, open the Configtool. The configtool should automatically find Diamond devices on the same network.

image.png

3. To change the network of your device, you can check the device that you want to change, and then click Edit or Batch Modify IP. It will then prompt you to change to the IP address, subnet mask, and gateway that you want.

image.png

3. To view your device, click on the Web icon as highlighted below
image.png

4. It will open up your device in a browser and you can view your device after logging in.


image.png

    • Related Articles

    • Emerald IPC || How to locate device on LAN via ENS tool

      How to locate IP Camera on LAN via ENS Station 1.Connect camera to POE switch 2.Open ENSTools and camera should take a few moments to pop up (Highlighted below) 3. Under the configuration tab click on the E symbol corresponding to the camera and log ...

    • Diamond IPC || Locate IP Camera on LAN via SmartPSS

      Download and install Smartpss Run and login to SmartPss. Click 'Devices' Click 'Auto Search' Your device should be displayed on the list. Click the check box to the left of your device, and click, "Add" Enter the Username and Password for your ...

    • Emerald IPC || How to locate IP Camera on LAN via ENS Station

      Open ENS Station and navigate to device management Here you can see the IP cameras by IP address. You can locate your specific camera by ip address, model number or Serial number. The cameras you see already are on the network so you can quickly add ...

    • UNV CMS + Software || How to locate IP Camera on LAN via EZ Station

      How to locate IP Camera on LAN via EZ Station First you will need to connect your camera to your LAN so it can be discoverable Once you have done that you will need to open up EZ STATION and it should take you to the main control panel page. From ...

    • Diamond IPC || How to Initialize IPC Without using ConfigTool (WEB 5.0) ||

      How to Initialize IPC Without using ConfigTool (WEB 5.0) This knowledge base article provides detailed instructions on initializing an IPC using the WEB 5.0 firmware. Initialization is the process of setting up the device for the first time, ensuring ...