Diamond IPC || IVS Schedule not being pushed to the cameras ||

Diamond IPC || IVS Schedule not being pushed to the cameras ||

The old IPC model numbers listed below cannot sync the IVS Schedule from the NVR. To modify the schedule settings, you need to log in to the IPC web browser and set the schedule there. 


HNC3I389H-ASPV/28
HNC3I349H-ASPV/28

HNC3I189T1-ASPV/28
HNC3I149T1-ASPV/28

    • Related Articles

    • Diamond Recorder || Setting Up IVS Recording || Web GUI

      Step One: Creating an IVS Rule on the camera and enabling Smartplan Login to the Camera's WEBUI Go to Settings>Events>IVS Click on the green "+" icon to add a rule. You can also rename the rule by double clicking under "Name". We will be adding a ...

    • Diamond IPC || Setting Up Auto Tracking PTZ New Interface || Web GUI

      Diamond IPC || Setting Up Auto Tracking PTZ New Interface || Web GUI Begin by accessing the Web GUI of the PTZ camera and select the setting icon in the upper right of the web page. Select PTZ and adjust where you would like to set the home position ...

    • Diamond IPC || How to set Schedule Web 5.0 ||

      This article provides a comprehensive guide on setting the Time Plan function using the WEB 5.0 firmware. The instructions may vary slightly depending on the model and firmware version of your device. Ensure your device model and firmware version ...

    • Diamond IPC || Reset button location

      Diamond IPC password resets will work one of two ways: Hold the reset button for 20 seconds or Short circuit the PCB holes shown in the photo for your camera model for 20 seconds PDN59U225H-I

    • Diamond IPC || How to Perform Firmware Update (WEB 5.0) ||

      How to Perform Firmware Updates (WEB 5.0) This article provides a step-by-step guide for performing firmware updates on devices using the WEB 5.0 firmware. The instructions may vary slightly depending on the model and firmware version of your device. ...