Diamond IPC || Motion Detection for Active Deterrence Camera || Web GUI

Diamond IPC || Motion Detection for Active Deterrence Camera || Web GUI

Log into the camera.
image.png



Click on the house icon image.png
image.png



Events
image.png

  Video Detection--> Enable. image.png



Area can be modified by configuring the grid.
image.png

image.png



Establish a timetable or maintain the default setting of 24 hours.
image.png

image.png

By default, Warning Lights and Siren are enabled. It can be disabled by deleting the event. Example: Deleting the siren.
image.png




Any event that has been removed, can be added back by clicking on Event Linkage.
image.png



For Warning Light, establish a timetable or maintain the default setting of 24 hours.
image.png




Click Apply when done.
image.png

 
 

    • Related Articles

    • Diamond IPC || IP Model HNC3I381H-ASPV/28 Audio, motion enabled by default || Web GUI

      The diamond Active Deterrence camera, model HNC3I381H-ASPV/28, can pose a tricky situation with the installer when these cameras are being installed. Most cameras by default, out of the box brand new, will have AD, motion events, lights, sirens, ...

    • Diamond Recorder || Setting Up Motion Detection || Web GUI

      ***Note: You must use Internet Explorer to view the system via web interface*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on ...

    • Emerald Recorder || Recorder Motion Detection || Web GUI

      To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...

    • UNV Recorder || Configuring Motion Detection || Web GUI

      To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...

    • Diamond IPC || How to Set Smart Motion Detection (WEB 5.0) ||

      How to Set Smart Motion Detection (WEB 5.0) This knowledge base article provides instructions on setting up Smart Motion Detection (SMD) for devices using the WEB 5.0 firmware. SMD enhances traditional motion detection by distinguishing between human ...