Diamond IPC || IP Model HNC3I381H-ASPV/28 Audio, motion enabled by default || Web GUI
The diamond Active Deterrence camera, model HNC3I381H-ASPV/28, can pose a tricky situation with the installer when these cameras are being installed. Most cameras by default, out of the box brand new, will have AD, motion events, lights, sirens, etc., off. This particular model camera comes out of the box with the Siren AND motion enabled by default. So when the installer installs this camera, and once powered up, it will start ringing when motion is detected.
HNC3I381H-ASPV/28 Analysis.
Brand new camera take out of the box and plugged in to POE switch, DHCP and connected to camera VIA Web interface. Swiped palm across lens, Camera IMMEDIATELY started to ring. Web interface shows BY DEFAULT, that Motion and Audio linkage is on as Fig 1-1 shows
Fig 1-1
Navigated to Camera’s Information screen. Fig 1-2
Firmware Version: 2.820.001W003.0.R Build 2021-09-10
Note: This is the firmware that camera has loaded on when purchased (3/21/2022)
Fig 1-2
PENDING INVENTORY ANALYSIS. PROBLEM IS UNDER INVESTIGATION.
Related Articles
Diamond Recorder || Configuring Audio and Two Way Talk w/ IP Cameras || Web GUI
***Note: You must use Internet Explorer to view the system via web interface*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on ...Diamond Recorder || Setting Up Motion Detection || Web GUI
***Note: You must use Internet Explorer to view the system via web interface*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on ...Diamond IPC || How to Set Audio Encode (WEB 5.0) ||
How to Set Audio Encode (WEB 5.0) This article provides a detailed guide on configuring audio encoding on devices using the WEB 5.0 firmware. The instructions may vary slightly depending on the model and firmware version of your device. Steps to Set ...Diamond IPC || How to Set Smart Motion Detection (WEB 5.0) ||
How to Set Smart Motion Detection (WEB 5.0) This knowledge base article provides instructions on setting up Smart Motion Detection (SMD) for devices using the WEB 5.0 firmware. SMD enhances traditional motion detection by distinguishing between human ...Diamond IPC || How to Set Audio Detection (WEB 5.0) ||
How to Set Audio Detection (WEB 5.0) This knowledge base article provides instructions on setting up the Audio Detection function for devices using the WEB 5.0 firmware. Audio Detection enables the system to monitor and respond to specific audio ...