Diamond Recorder || Change AI Mode in Diamond XVR || Web Client
1. Log into the XVR's web interface. Click on the AI tile in the home menu.
2. Under Parameters click on AI Mode.
3, Click on the drop down menu that appears on the right-hand side and select the AI mode. Click Apply.
Additional Support
For further assistance or inquiries, please contact our tech support at:
Email: support@enssecurity.com
Phone: (888) 397-1999
Related Articles
Diamond Recorder || Trigger MIC Out to Play Audio File on NVR/XVR || Web Client
Many Diamond series NVR/XVR's can be configured to play audio files through the MIC Out port on the back on the recorder. The MIC Out port is an RCA or BNC port on the back of the recorder and will need to be connected to an amplified device such as ...Diamond Recorder || Finding Recorder Information || Web Client
***Note: You must use Internet Explorer to view the system via web interface*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on ...Diamond Recorder || Setting Up Line Crossing || Web Client
***Note: You must use Internet Explorer to view the system via web interface*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on ...Diamond Recorder || Setting Up Intrusion Detection || Web Client
***Note: You must use Internet Explorer to view the system via web interface*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on ...Diamond Recorder || Disable AI mode NVR404L-32-I & NVR402A-16/16P-I
The NVR404L-32-I and NVR402A-16/16P-I can do 200mbps under normal circumstances. When "AI Mode" is enabled, the bandwidth capability is 80 mbps. AI Mode in this example means that the recorder has an entry set to "By Recorder" rather than by the IP ...