Diamond Recorder || Setting Up Line Crossing || Web Client
***Note: You must use Internet Explorer to view the system via web interface***
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser.
Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: “http://xxx.xxx.xxx.xxx” (Note: If the HTTP port has been changed from default, you will need to add the port number after the ip address by inserting a colon “:” in between the address and port number).
Install all requested web plugins that are prompted by Internet Explorer. Once installed, you may need to refresh, or restart the web browser. You may install the plugin by selecting “Run”.
After logging into the system, select the " AI " icon.
Under " Parameters ", select " IVS ".
On the IVS page, select the blue “+” sign and then mark the checkbox for the rule. This will bring up the parameters config to set up the rule. Left click on the camera image to start creating lines, then right click once to end the drawing. Select " Apply " when done.
Related Articles
Titanium Recorder || Setting Up Line Crossing || Web GUI
Please note: To use line crossing function, recorder must be updated to the latest firmware (1.3.3 and above) as well as the IP cameras firmware should be at least 4.x.x for line crossing to work correctly. ***Line crossing will NOT work with 3rd ...ENS Recorder || Configuring Line Crossing || Web GUI
***Please Note: This process will ONLY work with ENS Series cameras*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the ...Emerald Recorder || Line Crossing Setup || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...UNV Recorder || Configuring Line Crossing || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...Diamond Recorder || Setting Up Spot View || Web Client
***Note: You must use Internet Explorer to view the system via web interface*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on ...