Diamond Recorder || Setting Up Spot View || Web Client
***Note: You must use Internet Explorer to view the system via web interface***
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser.
Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: “http://xxx.xxx.xxx.xxx” (Note: If the HTTP port has been changed from default, you will need to add the port number after the ip address by inserting a colon “:” in between the address and port number).
Install all requested web plugins that are prompted by Internet Explorer. Once installed, you may need to refresh, or restart the web browser. You may install the plugin by selecting “Run”.
After logging into the system, select the second dot on the bottom of the screen. It will slide you to a second page
On the secondary menu, select Display.
In the Display menu, select Tour Setting.
In the Tour Setting menu, make sure to enable the tour (spot out). Select the channel view type and order. Scroll down and select Apply to keep changes. Please note that the system used for this instruction does NOT have Sub Screen, therefore the HDMI/VGA will mirror, therefore causing the main screen to perform the spot sequence.
Related Articles
ENS Recorder || Configuring Spot Out View || Web Client
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...Diamond Recorder || Setting Up Email Notifications || Web Client
***Note: You must use Internet Explorer to view the system via web interface*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on ...Diamond Recorder || Finding Recorder Information || Web Client
***Note: You must use Internet Explorer to view the system via web interface*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on ...Diamond Recorder || Setting Up Line Crossing || Web Client
***Note: You must use Internet Explorer to view the system via web interface*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on ...Diamond Recorder || Setting Up Intrusion Detection || Web Client
***Note: You must use Internet Explorer to view the system via web interface*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on ...