Diamond Recorder || Setting Up Email Notifications || Web Client

Diamond Recorder || Setting Up Email Notifications || Web Client

***Note: You must use Internet Explorer to view the system via web interface***

To access the web client, please use a Windows based PC and use Internet Explorer as the web browser.

Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: “http://xxx.xxx.xxx.xxx” (Note: If the HTTP port has been changed from default, you will need to add the port number after the ip address by inserting a colon “:” in between the address and port number).

 

Install all requested web plugins that are prompted by Internet Explorer. Once installed, you may need to refresh, or restart the web browser. You may install the plugin by selecting “Run”.

 

After logging into the system, select the SETTING button on the top left hand corner of the screen.

web Storage.PNG

 

In the SETTING menu, select Network.

web.settings.PNG

 

In the Network menu, select Email.

On the Email page, make sure to mark Enable, then, fill out the necessary information. Please refer to the email provider’s setup page to add the correct information. Press " Apply " when complete.

web.email.PNG

 

web.info.email.PNG

 

After setting the email sender and recipient, go back to the main menu and select Alarm.

web.default.PNG

 

In the Alarm menu, you can select options, such as " Video Detection " or " Motion Detection " and setup a rule to send an email when there is motion triggered. This is one example of many.

web.video.email.PNG

If you receive failure messages please log in to the Gmail account as the first account and click the link: https://accounts.google.com/b/0/DisplayUnlockCaptcha to unlock the account

    • Related Articles

    • ENS Recorder || Configuring Email Notifications || Web Client

      To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...

    • Diamond Recorder || Email Notifications from Google || Web GUI

      Before setting up notifications on the recorder, open up your Google account on a web browser and click on Manage your Google Account. Click on Security. 2-Step Verification needs to be as On. If not. Click on the arrow and follow the setup ...

    • UNV Recorder || Configuring Email Notifications || Web GUI

      To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...

    • Titanium Recorder || Email notifications without less secure apps (Gmail) || Web GUI

      Titanium: Email notifications without less secure apps (Gmail) - Web Gui Less secure apps is being discontinued by Google so this guide will go over what to do instead. First we will have to set up app passwords which require 2-Step Verification. ...

    • Diamond Recorder || Setting Up Spot View || Web Client

      ***Note: You must use Internet Explorer to view the system via web interface*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on ...