UNV Recorder || Configuring Email Notifications || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser.
Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: “http://xxx.xxx.xxx.xxx” (Note: If the HTTP port has been changed from default, you will need to add the port number after the ip address by inserting a colon “:” in between the address and port number).
Install all requested web plugins that are prompted by Internet Explorer. Once installed, you may need to refresh, or restart the web browser. You may install the plugin by selecting “Run”. In some instances, you may need to close the web browser to complete the installation. After installation completes, please re-open Internet Explorer.
After logging in, select the “Setup” option.
On the setup page, select “Network”.
After selecting Network, select the Email sub-menu.
Enter the necessary information needed to set up a sender and receiver account. Below is an example of a Gmail account used for email notifications.
After completing the email page, and successfully testing the email sender and receiver, you may go into any area that would send an email notification. Below is an example of email notifications for motion detection.
If you receive failure messages please log in to the gmail account as the first account and click the link: https://accounts.google.com/b/0/DisplayUnlockCaptcha to unlock the account
Related Articles
UNV Recorder || Configuring Line Crossing || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...UNV Recorder || Configuring Intrusion Detection || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...UNV Recorder || Configuring Email Notifications || Local GUI
Log into the system by entering the username and password. Default credentials are admin for the username and 123456 for the password. After logging in, move the mouse to the lower left hand corner of the screen and select the home icon. You may ...ENS Recorder || Configuring Email Notifications || Web Client
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...UNV Recorder|| Email notifications without less secure apps( Gmail) || Web GUI
Uniview Recorder: Email notifications without less secure apps (Gmail) - Web GUI Notes: Less secure apps are being discontinued by Google so this guide will go over what to do instead. 1. Log into Gmail with your username and password, then click on ...