ENS Recorder || Configuring Email Notifications || Web Client
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser.
Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: “http://xxx.xxx.xxx.xxx” (Note: If the HTTP port has been changed from default, you will need to add the port number after the ip address by inserting a colon “:” in between the address and port number).
Install all requested web plugins that are prompted by Internet Explorer. Once installed, you may need to refresh, or restart the web browser. You may install the plugin by selecting “Run”. In some instances, you may need to close the web browser to complete the installation. After installation completes, please re-open Internet Explorer.
Depending on the firmware of the recorder, there may be an updated plugin available. If so, you will see the following prompt. Follow the previous instructions to update the plugin.
Once logged into the system, select the Configuration tab.
In the Configuration Menu, select the Network option.
In the Network menu, select the Advanced option.
In the Advanced Settings for network, select the Email tab.
On the Email page, fill out all the necessary information to send email notifications and recipients for these notifications. Please see below for an empty field as well as a completed field.
***Please note that each email provider’s information may differ; please refer to email provider’s web page for additional information***
Use port 587 if 465 fails the test
If you receive failure messages please log in to the gmail account as the first account and click the link: https://accounts.google.com/b/0/DisplayUnlockCaptcha to unlock the account
Related Articles
UNV Recorder || Configuring Email Notifications || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...Diamond Recorder || Setting Up Email Notifications || Web Client
***Note: You must use Internet Explorer to view the system via web interface*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on ...ENS Recorder || Enabling Mobile Push Notifications || Web Client
***Note: You will need to download the ENS Vision app from the phone’s respective app store.*** Please make sure the recorder is well connected to the Internet. And the Register Status of the “Platform Access” shows Online and the ENS Vision Account ...ENS Recorder || Configuring Intrusion Detection || Web GUI
***Please Note: This process will ONLY work with ENS Series cameras*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the ...ENS Recorder || Configuring Line Crossing || Web GUI
***Please Note: This process will ONLY work with ENS Series cameras*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the ...