Diamond Recorder || Email Notifications from Google || Web GUI

Diamond Recorder || Email Notifications from Google || Web GUI

Before setting up notifications on the recorder, open up your Google account on a web browser and click on Manage your Google Account. 
image.png



Click on Security.
image.png



2-Step Verification needs to be as On. If not. Click on the arrow and follow the setup instructions.
image.png



Once the setup is complete it should say On.
image.png



Click on App passwords.
image.png



On the Select app drop down, select Mail.
image.png



On the Select device drop down, select Other (Custom name).
image.png



Enter Diamond NVR or another name that will help link this password to the recorder in the blank field. Click Generate. 
image.png



A password will be generated. Make a note of it since it will be needed.
image.png



On the recorder, Click on SETTING and then select Network.
image.png



Click on Email.
image.png



Ensure Enable is checked off and enter in information as shown below. 
image.png



Enter in the email address in Username and Sender. In Password, enter in the password form 2-step verification. 
lALPF76xrRS4qjPNBCTNDOw_3308_1060.png



Select TLS in Encryption Type. Add all email addresses that will receive notifications in the Receiver section.
image.png



Next to Sending Interval, enter the number of seconds you want between each email notice.
image.png



To ensure the email notification system is still operational, you can sign up to receive emails by checking off Health Mail box. In the field next to Sending Interval, specify how frequently you want those emails to be sent.
image.png


Click Apply when done.
image.png



To test alerts using the data you entered above, click the Test button on the bottom left.
A notification that reads Test succeeded will appear at the top, and you will also receive a test email.
If it reads Test Failed, double-check the data you provided earlier.
image.png