Diamond Recorder || How to Add Additional RAID Group || Local GUI

Diamond Recorder || How to Add Additional RAID Group || Local GUI

1. Select the "Setting" and go to "Storage"

image-1645028899382.png

2. Click on "Disk Manager" to Review the current Raid and the available Disks Verify the "Health Status" of those new added Disks

image-1645028951135.png

3. Once everything is correct, select the "RAID" tab and make sure Raid/Disks Info will show on this page as well.

image-1645029035822.png

4. Select the available Disks, verify the Raid Type, and click "Manual Create" at the bottom of the Page.

image-1645029121648.png

5. Once Confirmed the Raid Type and the selected Disks, please clicked "OK" and all the selected Disks Data Will be Erase due to creating a new Raid Group.

image-1645029190982.png

6. Once the new Raid Group is created, it will show under the "RAID" Tab Section.

image-1645029244717.png

 

 

    • Related Articles

    • Diamond Recorder || Tripwire Setup(Local GUI)

      Diamond Series Tripwire Setup (Local GUI) 1. From the Main Menu select AI. 2. Select Parameters on the left. Select Smart Plan. 3. Use the drop down box to select the camera channel. 4. Click and highlight IVS (You may need to deselect any other ...

    • Diamond Recorder || How to Add User || Local GUI

      1. Click the Setting icon in the top left of the page 2. Select Account 3. Click on Add 4. The Add User menu will appear. Use this window to fill out full user details User Name Password Group - user can be set to a User account group for multiple ...

    • Diamond Recorder || Password reset (4.0) || Local GUI

      How to Reset a Diamond Recorder Password If you’ve forgotten the password to your ENS Titanium recorder, follow these steps to reset it. This process does not require internet access on the recorder itself. Step 1: Select "Forgot Password?" From the ...

    • UNV Recorder || How to add a user for Uniview recorders (Local GUI)

      Uniview: Add a User (Local GUI) Log into your Uniview recorder and enter the main menu. Select System and then click on User. Click on Add to begin creating a new user. Enter the new user information. (You can enable Pattern unlocking here.) Then ...

    • Emerald Recorder || Recorder Add User || Local GUI

      1. In the menu ,select the system tab. 2. Once in the system menu, select the user tab located on the left panel. 3. In the user Menu, select the add button located at the bottom. 4. In the pop up menu, type in user name and select user type. The ...