Diamond Recorder || How to Firmware Update the Recorder || Local GUI

Diamond Recorder || How to Firmware Update the Recorder || Local GUI

Log into the system by entering the username and password.

 

After logging in, right click on the screen and select “Menu”

 

On the Main Menu page, select MAINTAIN.

maintain.PNG

 

On the MAINTAIN page, select Manager, and then select Update.

firmware update.PNG

 

On the Update page, there are two ways to update firmware. The File update is for offline updates, where the file was provided by an ENS tech and added to a flash drive. The Manual Check is for when the system is connected to the internet, it will be able to check the cloud server for any available updates.

firmware update.PNG

    • Related Articles

    • UNV Recorder || How to Update Firmware on Recorder || Local GUI

      Log into the system by entering the username and password. Default credentials are admin for the username and 123456 for the password. After logging in, move the mouse to the lower left hand corner of the screen and select the home icon. You may ...

    • Emerald Recorder || Recorder FW Update || Web GUI

      Finding Recorder Information (Web GUI) To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The ...

    • Diamond Recorder || How to Firmware Update the Recorder || Web Client

      ***Note: You must use Internet Explorer to view the system via web interface*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on ...

    • Diamond IPC || How to Perform Firmware Update (WEB 5.0) ||

      How to Perform Firmware Updates (WEB 5.0) This article provides a step-by-step guide for performing firmware updates on devices using the WEB 5.0 firmware. The instructions may vary slightly depending on the model and firmware version of your device. ...

    • Diamond Recorder || Recorder Start Up Wizard || Local GUI

      1. When you first turn on the recorder you will be greeted with the region settings. Click on the drop down menu and select "United States" and click Next. 2. Select the proper time zone setting for your region. 3. You will now be prompted to input a ...