Emerald Recorder || Recorder FW Update || Web GUI
Finding Recorder Information (Web GUI)
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser.
Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: “http://xxx.xxx.xxx.xxx” (Note: If the HTTP port has been changed from default, you will need to add the port number after the ip address by inserting a colon “:” in between the address and port number).
Install all requested web plugins that are prompted by Internet Explorer. Once installed, you may need to refresh, or restart the web browser. You may install the plugin by selecting “Run”. In some instances, you may need to close the web browser to complete the installation. After installation completes, please re-open Internet Explorer.
After you login, select the “Setup” option.
After selecting Setup, select Maintenance
Maintenance
In the maintenance page, you will have the option to Local Upgrade and Cloud Upgrade.If the system is offline, or an ENS tech has provided firmware, you can select Local Upgrade. Please select Browse in Path. Select the file and then press update.
Related Articles
Emerald Recorder || Setup MyDDNS || Web GUI
Emerald provides customers with an option to use Star4Live for Dynamic DNS. There are 2 steps to set up the service. Enable P2P and connect Star4Live account Configure MyDDNS service Enable P2P and Create/Connect Star4Live In your NVR, go to Setup > ...Emerald Recorder || How to set up Star4Live DDNS || WEB GUI
Emerald provides customers with an option to use Star4Live for Dynamic DNS. There are 2 steps to set up the service. Enable P2P and connect Star4Live account Configure MyDDNS service Enable P2P and Create/Connect Star4Live In your NVR, go to Setup > ...Emerald Recorder || Recorder Schedule Recording || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...Emerald Recorder || Recorder Motion Detection || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...Emerald Recorder || Finding Recorder Information || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...