Emerald Recorder || Configuring Audio and Two Way Talk (Web GUI)
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser.
Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: “http://xxx.xxx.xxx.xxx” (Note: If the HTTP port has been changed from default, you will need to add the port number after the ip address by inserting a colon “:” in between the address and port number).
Install all requested web plugins that are prompted by Internet Explorer. Once installed, you may need to refresh, or restart the web browser. You may install the plugin by selecting “Run”. In some instances, you may need to close the web browser to complete the installation. After installation completes, please re-open Internet Explorer.
In order to test if the 2-way audio function works properly, you need to turn on the audio stream. First go to the setup page.
On the Setup page, select Camera on the left hand side menu.
After selecting Camera, select the Encoding sub-menu.
Turn of the audio stream
And then go back to the Live View page, you will be able to use audio/2-way talk features. If a camera supports 2-way audio, you will see that option.
Related Articles
Diamond Recorder || Configuring Audio and Two Way Talk w/ IP Cameras || Web GUI
***Note: You must use Internet Explorer to view the system via web interface*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on ...Titanium Recorder || Setting Up Audio and Two Way Talk || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...Diamond Recorder || Configuring Audio and Two Way Talk || Local GUI
Log into the system by entering the username and password. After logging into the recorder, you will have the option to use the mouse pointer and select the area above the camera channel. This will show a small menu page where 2-way talk can be ...UNV Recorder || Setting Up Audio and Two Way Talk || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...ENS IPC || Enabling Audio and Two Way Talk || Web Client
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...