Recorder Add IP Camera

To access the web client, please use a Windows based PC and use Internet Explorer as the web browser.

Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: “http://xxx.xxx.xxx.xxx” (Note: If the HTTP port has been changed from default, you will need to add the port number after the ip address by inserting a colon “:” in between the address and port number).

Install all requested web plugins that are prompted by Internet Explorer. Once installed, you may need to refresh, or restart the web browser. You may install the plugin by selecting “Run”. In some instances, you may need to close the web browser to complete the installation. After installation completes, please re-open Internet Explorer.

After you login, select the “Setup” option.

Select Camera.

In the Camera page, you can (1) select CH you want to add a camera. (2) Modify information about the IP camera you want to add.(3)（4） Change the plug and play mode to IP address. （5）change the protocol depending on your camera brand. And then fill out all informations(IP address, port, username and password) 

Another way you can add ip cameras by click the auto search.

In the auto search page, you can find all IP cameras under the same local network. Select the camera you want to add.