ENS Recorder || Configuring Motion Detection || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser.
Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: “http://xxx.xxx.xxx.xxx” (Note: If the HTTP port has been changed from default, you will need to add the port number after the ip address by inserting a colon “:” in between the address and port number).
Install all requested web plugins that are prompted by Internet Explorer. Once installed, you may need to refresh, or restart the web browser. You may install the plugin by selecting “Run”. In some instances, you may need to close the web browser to complete the installation. After installation completes, please re-open Internet Explorer.
Depending on the firmware of the recorder, there may be an updated plugin available. If so, you will see the following prompt. Follow the previous instructions to update the plugin.
Once logged into the system, select the Configuration tab.
In the Configuration menu, select the Event option.
In the Basic Event menu, make sure to enable motion detection by marking the check box with adjusting the sensitivity as needed.
Related Articles
ENS Recorder || Configuring Intrusion Detection || Web GUI
***Please Note: This process will ONLY work with ENS Series cameras*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the ...ENS Recorder || Configuring Line Crossing || Web GUI
***Please Note: This process will ONLY work with ENS Series cameras*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the ...UNV Recorder || Configuring Motion Detection || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...ENS Recorder || Configuring Motion Detection || Local GUI
Log into the system. Once logged in, move the mouse to the top center area and click the “arrow-like” button for the main menu access. After selecting the Menu, select the Storage tab. After selecting the Storage menu, select the Event tab. When ...Emerald Recorder || Recorder Motion Detection || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...