Titanium Recorder || ENS Analog HD Camera Audio Over COAX on Titanium DVR || WEB GUI
This report is composed to show findings of an ENS Analog HD Camera, Specifically model SCC35T4M/28-H that shows camera's built-in MIC working over COAX with a Titanium DVR.
Analog HD camera, Model SCC35T4M/28-H
Needs to know if Built-in Mic will work on a couple of DVR's trough any of the HD protocols.
-
ED8216H5-F2
- CVI: No Audio
- TVI: Audio Works Perfect
- AHD: No Audio
- CVBS: No Audio
- Chrome: Audio Yes
- Edge I.E Mode: Audio Produced
**The Difference between this recorder and the others was that it has a "Audio Over Coax" Setting under Camera Signal.
2. ED8432H5-D2
- CVI: No Audio Produced.
- TVI: Audio Works Perfect.
- AHD: No Audio Produced.
- CVBS: No Audio Produced.
- Chrome: Audio Yes.
- Edge I.E. Mode: Audio Produced.
**This DVR ALSO has the setting under the "CAMERA SIGNAL" Setting page.
-
ED8016H5-BN
- CVI: No Audio
- TVI: 1.3.8
- AHD: No Audio
- CVBS: No Audio
- Chrome: 1.3.8
- Edge I.E Mode: 1.3.8
To finalize, Titanium's native protocol for analog is TVI, so therefore, TVI works with Audio over Coax on Titanium devices. When using a Diamond recorder, the native Analog Protocol is CVI, so therefore, CVI Audio works over COAX on Diamond devices.
Note: Function test occured on 1.3.6. 1.3.8 adds the function.
Related Articles
Diamond Recorder || Connecting Analog PTZ Camera to Joystick or DVR
On this page, we will show you how to connect a Analog HD PTZ camera from Dahua into a Keyboard/Joystick combo using the RS485 Connections from the camera and 485 connections in back of the DVR. How to wire the NKB1000's RS485 port: 1. From the PTZ's ...Diamond Recorder || Setting Up Audio Recording for DVR || Local GUI
Enable audio source 1. Login using a web browser. 2. Click on Setting > Camera. 3. Click on Encode. And then select the camera channel that support audio. 4. Click on More and checkmark to enable Audio. 6. Select the Audio source for your HD-CVI ...ENS General || Checking if a device has Audio over Coax capabilities
Recorders: You may find out whether a recorder has Audio over Coax capabilities on the product page. Note: (B) Models support audio over coax while non (B) models do not. The (B) marker is only listed on the printed label on the unit and box. You ...ENS Recorder || How to change Signal Types on an ENS-H DVR (Local GUI)
ENS-H: How to change the channel signal type (4.0 Local GUI DVR) 1. Go to local GUI>Camera>Analog. Move the mouse cursor to the lower right corner until the cursor disappears, then double-click. 2. An interface will pop up for signal input types. 3. ...Diamond Recorder || Coax Camera Missing Audio ||
Installation steps: 1. Set camera dip-switch to CVI. 2.. Enable audio recorder side: Camera > Encode > More Setting > Enable Audio + Set Source to HDCVI.