Titanium Recorder || Setting Up Audio and Two Way Talk || Local GUI
Log into the system. On the live screen page, you will select a channel (generally channel 1, can be different depending on recorder and camera specifications). You will see a pop up menu bar show on the bottom of the camera channel.
The third icon from the left will be your audio button. Select this button to enable and disable audio. You will see a speaker icon on the top right hand of the channel if audio is enabled.
To enable the microphone, select the farthest right hand icon on the menu bar. When enabled, you will notice a microphone icon on the top right hand corner of the screen.
lo
Related Articles
Titanium Recorder || Setting Up Audio and Two Way Talk || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...Diamond Recorder || Configuring Audio and Two Way Talk || Local GUI
Log into the system by entering the username and password. After logging into the recorder, you will have the option to use the mouse pointer and select the area above the camera channel. This will show a small menu page where 2-way talk can be ...UNV Recorder || Setting Up Audio and Two Way Talk || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...Emerald Recorder || Configuring Audio and Two Way Talk (Web GUI)
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...Diamond Recorder || Configuring Audio and Two Way Talk w/ IP Cameras || Web GUI
***Note: You must use Internet Explorer to view the system via web interface*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on ...