UNV Recorder || Face Detection || Web GUI

UNV Recorder || Face Detection || Web GUI

Setup --> Client. Turn on Intelligent Mark and then Save. 
image.png

Camera--> Schedule. Turn on Redundant Recording and Recording Schedule.
image.png

Click Edit and then set up schedule. Click Ok. 
image.png


Click on Event tab and fill in the grid. It should be pink. 
image.png

Repeat the process under the Snapshot Schedule.
image.png

1. Smart--> 2. VCA Config--> 3. Select Camera --> 4. Enable Face Detection --> 5. Camera Side ---> 6. gear symbol. 
image.png

Select Full Screen for the whole or Specify Area and draw a rule. Save
image.png

image.png

To do a search:
Smart --> VCA Search --> Select camera --> time and date --> Search. 
image.png

    • Related Articles

    • UNV Recorder || Configuring Intrusion Detection || Web GUI

      To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...

    • UNV Recorder || Configuring Motion Detection || Web GUI

      To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...

    • UNV Recorder || HC121 UNV LPR Email Notification Setup || Web GUI

      From NVR WEB GUI Step 1. Go to Smart > Vehicle Detection > Plate List > Add (you can name the group what you like) Add plate numbers to this group for white list (or any other created group) Step 2. Select Monitoring Tab UN-HC121@TC-08S-Z UNV LPR ...

    • Emerald Recorder || Recorder Motion Detection || Web GUI

      To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...

    • ENS Recorder || Configuring Intrusion Detection || Web GUI

      ***Please Note: This process will ONLY work with ENS Series cameras*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the ...