UNV Recorder || How to Set Up EZCloud || Local GUI
Log into the system by entering the username and password. Default credentials are admin for the username and 123456 for the password.
After logging in, move the mouse to the lower left hand corner of the screen and select the home icon. You may receive the login screen after selecting the menu option, but will be taken to the main menu page once logged in. On the main menu, select System
After selecting System, select the Network option.
Under the network tab, make sure that DHCP is enabled (to obtain a network IP address automatically), then select the EZCloud tab.
On the EZCloud tab, make sure that EZCloud is enabled. Once enabled, the system will be able to be used via P2P
Note: The NVR can be accessed via phone app (EZView) or by Internet Explorer (http://en.ezcloud.uniview.com). Each user will need to register an account by providing an email address. The first person to scan the code will be the primary account holder, who will then share it with additional accounts as wanted/requested.
Related Articles
UNV Recorder || How to Set Up EZCloud || Web GUI
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...UNV Recorder || Configuring Email Notifications || Local GUI
Log into the system by entering the username and password. Default credentials are admin for the username and 123456 for the password. After logging in, move the mouse to the lower left hand corner of the screen and select the home icon. You may ...UNV Recorder || Footage Backup || Local GUI
Backing up Footage from the local recorder From the full screen view, Left Click to open the dropdown menu and select Menu > Playback Select the camera, date of the camera, and verify the time you are looking for Once verified click Start Clipping ...UNV Recorder || How to add a user for Uniview recorders (Local GUI)
Uniview: Add a User (Local GUI) Log into your Uniview recorder and enter the main menu. Select System and then click on User. Click on Add to begin creating a new user. Enter the new user information. (You can enable Pattern unlocking here.) Then ...Emerald Recorder || Intrusion Detection Configuration || Local GUI
Intrusion Detection Setup (Local GUI) In the NVR menu, select VCA 2.In the VCA menu, ensure you are on the VCA config tab located on the left and then select the camera that is needed for Intrusion detection setup. Under smart intrusion prevention ...