Akuvox Local || Remotely unlock doors connected to C315 Indoor Monitor
How to remotely unlock Electronic Door Lock that is directly connected to the C315W Indoor monitor relay using HTTP Unlock and Action URL.
NOTE: 'remote control enable' means that we can control the local relay remotely.
1. Go to C315 web portal Phone->Relay. Enable Remote Control function, and
enable Open Relay via HTTP, configure the username and password.
2. Go to Phone->Call Feature->Remote Control, configure the IP of A02.
3.log in to A02's web portal and go to Phone->Action URL to enable this function. And configure the trigger command of the indoor unit's relay.
The HTTP format of Akuvox devices: http://device_ip/fcgi/do?action=OpenDoor&UserName=username&Password=password&DoorNum=relayid=id
Note:
Device IP: The IP of C315;
Username/Password: Set the same username and password as an indoor unit;
DoorNum: Corresponding relay's id. 1 means relay A; 2 means relay B;
Related Articles
Akuvox General || Akuvox - Door Lock does not work when triggered from Indoor Monitor
Akuvox - Door Lock does not work when triggered from Indoor Monitor. Below are troubleshooting questions and steps causing an Akuvox monitor from not opening the door lock. Questions to ask call: Has this worked previously? Was there any work ...Akuvox Local || How to Configure Web Relay on the Indoor Monitor
Scenario When you can connect the web relay to the indoor monitor if you can control door unlock on the indoor monitor directly. This article helps you walk through the process for the web relay configuration on the indoor monitor Operation ...Akuvox Local || Akuvox E12W - How to unlock doors via Motion detection
Akuvox E12W - How to unlock doors via Motion detection. To setup the E12 to unlock on motion you will need to make sure that HTTP Unlock is enabled, Goto "Access Control > Relay > Open Relay via HTTP" and enable this feature then create user ...Akuvox Local || How to install the 3rd party apk in Akuvox indoor monitor
How to install the 3rd party apk in Akuvox indoor monitor ? Steps to install and open third-party app. 1.Move to web view -> Phone -> App 2.Device‘s main interface -> More -> System Info -> User Permission -> tap 10 times -> move back to the main ...Akuvox Local || Voice Assistant
Akuvox General || Voice Assistant -------------------------------------------- Albert is a Voice Assistant from Akuvox. The Voice Assistant may be configured for intercom calls, door opening, arming modes, and other functions. Voice Command: "Albert" ...