Diamond IPC || Adding an IP Camera Using the Onvif Protocol ||

Diamond IPC || Adding an IP Camera Using the Onvif Protocol ||

This article provides a step-by-step guide for integrating an IP camera into your NVR/XVR system using the Onvif protocol. This process ensures seamless connectivity and reliable surveillance monitoring.

Before you begin, ensure you have:

  • The IP address of the camera
  • The camera's password
  • Administrative access to the NVR 
Log in to the NVR 
image.png
Click on SETTING in the main menu. Select CAMERA from the dropdown options.
image.png

Choose Camera List to view the current list of connected cameras.
image.png

Click on Manual Add located at the top or bottom of the Camera List screen.
image.png


Ensure the Onvif protocol option is checked to enable Onvif camera addition.
Input the IP address of the camera in the designated field.
Enter the camera's password in the corresponding field.
Click OK to finalize the addition of the camera.
image.png

A confirmation message, "Operation succeeded," will appear, indicating that the camera has been successfully added.
image.png

Troubleshooting
If the camera does not connect, please verify the following:

  • The IP address and password entered are correct.
  • The camera supports the Onvif protocol.
  • The network connection is stable and properly configured.

Additional Support
For further assistance, please contact our technical support team at support@enssecurity.com or call (888) 397-1999

    • Related Articles

    • Diamond IPC || Enabling ONVIF || Web GUI

      This is a quick guide on how to find an enable ONVIF on a Diamond IPC. Step 1. Log into the IPC directly with the camera's IP address. NOTE: Default IP is 192.168.1.108. Step 2. Click on settings then find "Safety" from the "System" drop down on the ...

    • ENS IPC || External 3rd Party IP Camera Initialization || Local GUI

      Log into the system. Once logged in, move the mouse to the top center area and click the “arrow-like” button for the main menu access. After selecting the menu, select the Camera tab. When selecting the Camera tab, you will be taken to the camera ...

    • General || ONVIF

      What is ONVIF (Open Network Video Interface Forum)? ONVIF is a global open standard that allows IP based CCTV equipment from different manufacturers to communicate with each other. An example of ONVIF in action would be if you used a NVR from our ...

    • Diamond IPC || Set Up RTMP on a Diamond IP Camera (WEB 5.0)

      How to Set Up RTMP on an IP Camera (WEB 5.0) Real-Time Messaging Protocol (RTMP) in IP cameras is used for efficient live streaming of audio, video, and data over the internet. It provides low latency streaming for real-time viewing, ensures stable ...

    • ENS IPC || External 3rd Party IP Camera Initialization || Web Client

      ***Open SADP Tool (Downloadable from www.enssecurity.com Support->Download->Tools)*** Use the SADP Tool to set up the IP addresses for each camera respectively. Depending on the setup, Each IP camera will have the same IP scheme as the NVR’s internet ...