Diamond IPC || Changing from Line to Mic || Web GUI

Diamond IPC || Changing from Line to Mic || Web GUI

In some situations will need to switch IP cameras from Line (camera receives audio from the external audio jack) or Mic (camera receives audio from the built in Microphone).

Not all models support built in microphones. Check your product model's spec sheet to confirm.

Click "Setting"

image-1631655183265.PNG

Select "Camera" then "Audio"

image-1631656882244.png

Change the "AudioIn Type" from "LineIn" to "Mic"
"Sub Stream" can also be enabled if you desire to have audio on your substream.

image-1631656959948.png

 

    • Related Articles

    • Diamond IPC || How to Set Scene Changing (WEB 3.0) ||

      How to Set Scene Changing (WEB 3.0) This knowledge base article provides instructions on setting up the Scene Changing function for devices using the WEB 3.0 firmware. Scene Changing detects significant alterations in the camera's view, enhancing ...

    • Emerald IPC || Change IPC from Line to Mic

      Change IPC from line to mic * Note camera needs to have 2-way functionality. You may also use the Access button while on the same network as the recorder. If not, you must use the IP address of the IP camera. 1. Type IP address for camera on URL. 2. ...

    • Diamond IPC || How to Set Scene Changing (WEB 5.0) ||

      How to Set Scene Changing (WEB 5.0) This knowledge base article provides instructions on setting up the Scene Changing function for devices using the WEB 5.0 firmware. Scene Changing detects significant alterations in the camera's view, enhancing ...

    • ENS Recorder || Configuring Line Crossing || Web GUI

      ***Please Note: This process will ONLY work with ENS Series cameras*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the ...

    • Diamond IPC || Enabling ONVIF || Web GUI

      This is a quick guide on how to find an enable ONVIF on a Diamond IPC. Step 1. Log into the IPC directly with the camera's IP address. NOTE: Default IP is 192.168.1.108. Step 2. Click on settings then find "Safety" from the "System" drop down on the ...