Diamond Recorder || How to Enable Audio/Video Transmission Encryption

How to Enable Audio/Video Transmission Encryption

This article provides a step-by-step guide for enabling audio and video transmission encryption on your NVR (Network Video Recorder). This feature ensures the security of your transmitted data by encrypting audio and video streams.

Ensure that:

The supporting equipment or software must support the video decryption function, otherwise, the audio and video cannot be played.

Navigate to Security Settings

• Select SETTING from the main menu.
• Go to SECURITY.

Enable A/V Encryption

• Select A/V Encryption.
• Choose Audio/Video Encrypted Transmission.
• Click Enable.
• Click Apply to save the settings.

 

By following these steps, you can effectively enable audio and video transmission encryption on your NVR. This enhances the security of your surveillance system by protecting your data from unauthorized access.

Additional Support

For further assistance, please contact our technical support team at support@enssecurity.com or call (888) 397-1999.

• Related Articles

• Diamond Recorder || Coax Camera Missing Audio ||

  Installation steps: 1. Set camera dip-switch to CVI. 2.. Enable audio recorder side: Camera > Encode > More Setting > Enable Audio + Set Source to HDCVI.

• Diamond Recorder || Trigger MIC Out to Play Audio File on NVR/XVR || Web Client

  Many Diamond series NVR/XVR's can be configured to play audio files through the MIC Out port on the back on the recorder. The MIC Out port is an RCA or BNC port on the back of the recorder and will need to be connected to an amplified device such as ...

• Diamond Recorder || How to enable 2 way talk || Local GUI

  To use 2-way talk on a Diamond series recorder, you must enable audio on each camera you plan to use. Step 1. Log into the NVR. Step 2. Right click with your mouse and click on "Main Menu". Step 3. Click on "Camera" located at the left side of the ...

• Diamond Recorder || Configuring Audio and Two Way Talk w/ IP Cameras || Web GUI

  ***Note: You must use Internet Explorer to view the system via web interface*** To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on ...

• ENS Recorder || SN7864R-M Enable Audio || Local GUI

  Main Menu --> Camera Click on Video Parameters. Main Stream --> Camera --> Stream Type --> Video & Audio --> Apply. Repeat on Sub-Stream.