Diamond Recorder || How to HW reset NVR/DVR
Most Diamond XVR and some of the NVR come with HW reset button as shown below.
To perform reset on the recorder:
1. Power off the NVR/DVR
2. Press and hold the reset button
3. Power on the NVR/DVR
4. Keep the reset button pressed for about 20 seconds
5. After the reset, the NVR/DVR will come back to factory default.
XVR-X/-12, NVR5XX-4KS2 have reset buttons exception NVR504L-24/24P-4KS2.
Related Articles
Diamond Recorder || SSH Into a Diamond Recorder
Sometimes, you will come cross installers that would like to SSH into a Diamond recorder either because they want to see the inner workings of the DVR/NVR, they want to change some stuff in there that they think would benefit them. SSH or sometimes ...Diamond Recorder || Password reset (4.0) || Local GUI
How to Reset a Diamond Recorder Password If you’ve forgotten the password to your ENS Titanium recorder, follow these steps to reset it. This process does not require internet access on the recorder itself. Step 1: Select "Forgot Password?" From the ...Diamond Recorder || Connecting Analog PTZ Camera to Joystick or DVR
On this page, we will show you how to connect a Analog HD PTZ camera from Dahua into a Keyboard/Joystick combo using the RS485 Connections from the camera and 485 connections in back of the DVR. How to wire the NKB1000's RS485 port: 1. From the PTZ's ...Titanium Recorder || How to find the correct firmware for NVR/DVR ||
The model number, current firmware version and chipset will be needed. Login to the NVR or DVR. Function Panel --> System. Information --> Basic --> About this machine. Take note of the model number. Make note of Firmware version and chipset. (This ...Titanium Recorder || Firmware updates for NVR/DVR with current firmware 1.2.9 or below
Typically you do not need to step-upgrade Titanium recorders unless noted. (e.g. 1.2.x-1.3.x requires a special firmware) However, 1.0.1, 1.0.2, and 1.0.3 will not accept the higher firmware's. To work around this please upgrade to 1.0.4, then update ...