ENS Recorder || Configuring Spot Out View (Legacy) || Local GUI
Log into the system.
Once logged in, move the mouse to the top center area and click the “arrow-like” button for the main menu access.
After selecting the Menu, select the System tab.
After selecting the System menu, on the General page, make sure that the resolutions are set correctly for each respective output. After confirming output resolutions, select the Live View tab on the left-hand side of the System menu.
On the Live View menu, Select the Video Output Interface. This will be the output that controls the mouse and menu (primary monitor). After setting the output interface, select the View tab on the left-hand side of the System menu.
On the View menu, select the channel split by choosing the view on the bottom area of the menu. In the Video Output Interface drop down menu, select the output that view settings need to be adjusted.
After the split view is chosen, you may start to assign the desired camera to the grille where you wish to place this specific camera. Simply click on the grille first and select the camera from the list on the left.
You may do the same to your secondary video output by choosing from the drop down menu.
Related Articles
ENS Recorder || Configuring Spot Out View || Web Client
To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: ...ENS Recorder || Backup onto USB || Local GUI
How to Backup footage to a USB drive on the ENS Recorder local GUI Starting on Live View in Full screen Right Click for the options box and click Menu. When there, click the Down Arrow to find and select Playback. In Playback select a camera or ...ENS Recorder || How to View/Modify Channel Default Password Management || Local GUI
ENS Recorder || How to View/Modify Channel Default Password Management || Local GUI *This process will only work on the Local GUI of the recorder. Log into the recorder and select “Home” on the upper left hand corner. Select “Camera” Within “camera“ ...ENS Recorder || Adding a Recorder to ENS Vision || Local GUI
***Note: You will need to download the ENS Vision app from the phone’s respective app store.*** During the initial setup of the recorder, you will have an option to set up the network to gain internet access and enable the P2P (Platform Access) ...ENS Recorder || Configuring Intrusion Detection || Local GUI
Log into the system. Once logged in, move the mouse to the top center area and click the “arrow-like” button for the main menu access. In the Main Menu, select the storage tab. After selecting the Storage menu, select the Event tab. When selecting ...