UNV Recorder || Setting Up 3rd Party Cameras || Local GUI
*** Please Note: 3rd party cameras may need specific tools or firmwares to work correctly. Please refer to the camera manufacturer for IP tools as well as general troubleshooting with the cameras in regards to connectivity issues.***
Log into the system by entering the username and password. Default credentials are admin for the username and 123456 for the password.
After logging in, move the mouse to the lower left hand corner of the screen and select the home icon. You may receive the login screen after selecting the menu option, but will be taken to the main menu page once logged in. On the main menu, select Camera.
On the Camera menu, verify that the camera comes online by confirming that the status symbol for the camera is a blue play button. If configurations need to be made to have the correct address or passwords, that may be modified by selecting the Configure button.
In the config menu, change the Add Mode from Plug-and-Play to IP Address.
Change the Protocol from Uniview to ONVIF.
Generally, the ONVIF port will be 80. Username and passwords will vary depending on camera manufacturers. Please contact technical support for respective vendors when necessary.
Related Articles
UNV Recorder || Setting Up 3rd Party Cameras || Web GUI
Please note: A Uniview NVR with Uniview cameras plugged into the internal POE of the recorder will essentially be plug and play. Third party cameras are not able to be set in this manner, so manual configurations must be made for the NVR to connect ...Diamond Recorder || Setting Up Audio Recording for DVR || Local GUI
Enable audio source 1. Login using a web browser. 2. Click on Setting > Camera. 3. Click on Encode. And then select the camera channel that support audio. 4. Click on More and checkmark to enable Audio. 6. Select the Audio source for your HD-CVI ...Emerald Recorder || Intrusion Detection Configuration || Local GUI
Intrusion Detection Setup (Local GUI) In the NVR menu, select VCA 2.In the VCA menu, ensure you are on the VCA config tab located on the left and then select the camera that is needed for Intrusion detection setup. Under smart intrusion prevention ...UNV Recorder || Configuring Email Notifications || Local GUI
Log into the system by entering the username and password. Default credentials are admin for the username and 123456 for the password. After logging in, move the mouse to the lower left hand corner of the screen and select the home icon. You may ...ENS Recorder || Backup onto USB || Local GUI
How to Backup footage to a USB drive on the ENS Recorder local GUI Starting on Live View in Full screen Right Click for the options box and click Menu. When there, click the Down Arrow to find and select Playback. In Playback select a camera or ...