Akuvox General || How to configure exit button with R2X

Akuvox General || How to configure exit button with R2X

Website Configuration

Go to Intercom - Input to configure input settings.

Input Service: To enable or disable input trigger service.

Trigger Option: To choose open circuit trigger or closed circuit trigger. Low means that connection

between door terminal and GND is closed, while high means the connection is opened.

Action to execute: To choose which action to execute after the input terminal is triggered.

Http URL (Uniform Resource Locator): To configure URL (Uniform Resource Locator), If HTTP

action is chosen.

Open Relay: To configure relay to open.

Door Status: To show the status of input signal.

 

image.png


 

image.png


 


 

    • Related Articles

    • Akuvox General || Maglock & Exit Button Wiring

      Maglock & Exit Button Wiring Using R20K model as an example: Log in to the web interface of the device’s IP address from a web browser. Note: To find the IP address of your device, your computer must be connected to the same network. It is ...

    • Akuvox General || Exit Button AC-05 Wiring

      Exit Button AC-05 Connecting to an Akuvox R20A Model door phone as an example. Connect the Orange wire (N/O) from the AC-05 to the 'Door A' input port. Connect the Yellow wire (COM) from the AC-05 to the 'GND' port. The AC-05 Exit button is powered ...

    • Akuvox General || Maglock & Exit Button Wiring for A02S

      Maglock & Exit Button to A02S Wiring Diagram Maglock Wiring: Connect the Positive wire from Maglock to the RELAY_NC port. Connect the Positive wire from Power Supply to the RELAY_COM port. Connect both Negative wires together from Maglock & Power ...

    • Akuvox General || R20A Wiring Diagram Maglock & Exit Button

      Connect 12-Volt Positive from Power Supply to the COM (Common) port on the back of the R20. Connect Positive Wire from the Maglock to the NC (Normally Closed) port. Connect both Negative (Ground) wires together from the Maglock and Power Supply. For ...

    • Akuvox General || Hard Reset without Physical Reset Button

      _______________________________ Akuvox Hard Reset without Physical Reset Button ____________________________________________ R20 series, R20-2 series, R25A, E12, R27, and R28 Door Phone models can be Factory Reset by Short-circuiting the Input ...