Akuvox General || How to set up users
Access the Web Portal for your Akuvox device
-
Device must be on the same network as the computer you are logging in from.
-
Default UserName: admin
-
Default Password: admin
-
Depending on the device, the login screen may look different.
Different AKUVOX devices will have the option to add users in different places.
Intercom > User (R20 / R27 / R29)
Access Control > User (E12)
Directory > User (for Access Control devices like A01/A02)
Click the option to “ADD” a user. Pictured below is an example for the A02.
Fill out the user information. Add RF Cards and PIN numbers (some Akuvox devices will not have the option for PIN numbers). Example below is from the A02.
Click on submit at the bottom of the page to save user.
After clicking submit, the device will show the user’s information on the users list.
Related Articles
Akuvox General || How to set up KeyFobs and Tags
Go to Users page and add or edit users to add keyfobs to the user. For reference on how to add users on Akuvox devices: Akuvox General || How to set up users (force.com) NOTE: HID Card format 26-bit H10301 is not supported. Click on Obtain You will ...Akuvox General || Call Forwarding
Akuvox General || Call Forwarding ______________________________________ Users have the option to set up Call Forwarding to another number from the device’s Web Interface. For this example we will be using a Door Phone to call an Indoor Monitor. ...Akuvox General || How to add office users to cloud property
How to add office users to cloud property: Add Office Users You can add office staff and personnel to the offices you have created. Add User to Office After an office is created, you are required to add departments in the office, then you can start ...Akuvox General || How to Add Devices for Users in Single Tenant Manager
How to Add Devices for Users in Single Tenant Manager After the user account is created, you can start adding the device(s) and third-party camera for the specific user. However, you need to make sure that all the devices have been added to your ...Akuvox General || Control4 - Akuvox Communication Settings
Control4 - Akuvox Communication Settings 1. Call group Go to Agents interface and add Communication agent first. The default All call group is only with Control4 devices, like T3. Users can add new call group, like Call_to_C313_and_T3, and add C313 ...