Akuvox General || HTTP Unlock command does not work from other devices but works fine using a web browser

Akuvox General || HTTP Unlock command does not work from other devices but works fine using a web browser

Fix: Make sure "SessionCheck" is "DISABLED" on the receiving http relay on the akuvox unit controlling the door locks.

 

How to Configure open relay via HTTP for door unlock

 

You can unlock the door remotely without approaching the device physically for the door access by typing in the created HTTP command (URL) on the web browser to trigger the relay when you are not available by the door for the door access. You can go to Access Control > Relay > Open Relay via HTTP for the setting.

 

 

Parameter Set-up:

 

Switch: enable the HTTP command unlock function by clicking on Enable field. It is enabled by default.

 

SessionCheck: enable it so that the door can be unlocked via HTTP command even if the device web interface is not logged in successfully. When it is disabled, door cannot be unlocked via HTTP command.

 

User Name: enter the user's name of the device web interface for authentication purpose, for example, “Admin”.

 

Password: enter the password for the HTTP command for authentication purpose. For example: “12345”.

 

Please refer to the following example:
 

http://192.168.35.127/fcgi/do?action=OpenDoor&UserName=admin&Password=12345&DoorNum=1

    • Related Articles

    • Akuvox General || Using NFC Unlock

      Akuvox General || Using NFC Unlock The NFC feature requires the SmartPlus App. The Door Phone should be deployed on the Akuvox uCloud. To open doors via NFC, the feature must be enabled on the Door Phone, SmartPlus App, and the Users’ Mobile Phone ...

    • Akuvox General || Control4 - SIP and HTTP Unlock Settings for use with Akuvox

      Control4 - SIP and HTTP Unlock Settings for use with Akuvox. Go to the System Design interface to select the door phone first. Go to Properties interface to configure SIP account, SIP password, enable the Relay via HTTP option and configure its ...

    • Akuvox Local || How to Configure HTTP Door Unlock

      How to Configure HTTP Door Unlock The EC33 Elevator Controller supports remote door unlocking via an HTTP command. Simply enable this feature and input the HTTP command (URL) for the door phone. This will trigger the relay and open the door, even if ...

    • Akuvox General || Akuvox - Door Lock does not work when triggered from Indoor Monitor

      Akuvox - Door Lock does not work when triggered from Indoor Monitor. Below are troubleshooting questions and steps causing an Akuvox monitor from not opening the door lock. Questions to ask call: Has this worked previously? Was there any work ...

    • Akuvox Local || Remotely unlock doors connected to C315 Indoor Monitor

      How to remotely unlock Electronic Door Lock that is directly connected to the C315W Indoor monitor relay using HTTP Unlock and Action URL. NOTE: 'remote control enable' means that we can control the local relay remotely. 1. Go to C315 web portal ...