Akuvox Local || How to Configure HTTP Door Unlock

Akuvox Local || How to Configure HTTP Door Unlock

How to Configure HTTP Door Unlock

The EC33 Elevator Controller supports remote door unlocking via an HTTP command. Simply enable this feature and input the HTTP command (URL) for the door phone. This will trigger the relay and open the door, even if the users are away from the device.

Navigate to the web Device > Relay interface.

  • Username: enter the user name for the HTTP command authentication, for example, admin.

  • Password: enter the password for the HTTP command authentication, for example, 12345.

Please refer to the following example:
http://192.168.35.127/fcgi/do?action=OpenDoor&UserName=admin&Password=12345&DoorNum=1

Note

  • DoorNum in the HTTP command above refers to the relay number #1 to be triggered for the door access.