Diamond IPC || How to Set Up Record Control on IPC ||

Diamond IPC || How to Set Up Record Control on IPC ||

How to Set Up Record Control on IPC (Web 5.0)

This article provides a step-by-step guide for configuring record control on a IPC using the Web 5.0 firmware. The instructions may vary slightly depending on the model and firmware version of your device.
Ensure that your device model and firmware version support record control. This tutorial is based on the Web 5.0 firmware interface.

 

Steps to Set Up Record Control


Login to the Device

Access the device's web interface.
Enter your login credentials to gain access.


Navigate to Record Control Settings

From the homepage, select Record.
image.png


Go to Record Control.
image.png



Configure Record Control Parameters

Max Duration: Set the duration for each video file. This determines how long each recorded segment will be.
Pre-Record: Set the time to record video before a triggered alarm event. This ensures you capture the moments leading up to the event.
Record Mode:
Manual: The system starts recording manually.
Auto: The system starts recording based on the configured period in the record plan.
Record Stream: Choose between Main Stream or Sub Stream based on your recording requirements.
image.png



Apply the Settings

Click Apply to save the configurations.
If needed, use Default to restore all settings to their original state.
image.png


By following these steps, you can effectively set up and configure record control on your IPC using the Web 5.0 firmware. This allows for flexible and customized recording settings tailored to your surveillance needs.


Additional Support

For further assistance, please contact our technical support team at support@enssecurity.com or call (888) 397-1999.

    • Related Articles

    • Diamond IPC || Configuring IP Camera to Record to SD-Card

      Download and install ConfigTool Run the Config Tool The Config Tool should display your IP Camera. Click the, icon to open Internet Explorer and access your IP Camera. Login with your username and password. After logging in, Setting > Storage > ...

    • Diamond IPC || How to Set Face Detection Function (WEB 3.0) ||

      How to Set Face Detection Function (WEB 3.0) This article provides instructions on setting up the Face Detection function for devices using the WEB 3.0 firmware. Face Detection identifies and captures facial images within a surveillance area, ...

    • Diamond IPC || Image Configuration Settings for the New Camera Web GUI

      AI SSA (Scene Self Adaption)- based on deep learning algorithm that can intelligently identify multiple scenes and adjust to their optimal images. If mode is turned on, you won't be able to make adjustments in Exposure, Backlight, Defog, and AFSA. ...

    • Diamond IPC || How to Set Up Local Storage (Web 5.0) ||

      How to Set Up Local Storage (Web 5.0) This article provides a step-by-step guide for configuring local storage on your IPC using the Web 5.0 firmware. The instructions may vary slightly depending on the model and firmware version of your device. ...

    • Diamond IPC || How to Set Up FTP Storage on an IPC (Web 5.0) ||

      How to Set Up FTP Storage on an IPC (Web 5.0) This article provides a step-by-step guide for configuring FTP storage on an IPC using the Web 5.0 firmware. The instructions may vary slightly depending on the model and firmware version of the device. ...