Diamond IPC || How to Set Up Local Storage (Web 5.0) ||

Diamond IPC || How to Set Up Local Storage (Web 5.0) ||

How to Set Up Local Storage (Web 5.0)

This article provides a step-by-step guide for configuring local storage on your IPC using the Web 5.0 firmware. The instructions may vary slightly depending on the model and firmware version of your device.

Ensure that your device model and firmware version support local storage. This tutorial is based on the Web 5.0 firmware interface.


Steps to Set Up Local Storage

Login to the Device

Access the device's web interface.
Enter your login credentials to gain access.
image.png

Navigate to Record Settings

From the homepage, select Record.
image.png


Access Storage Settings

Go to Record > Storage.
image.png


Select Recording Mode When Disk is Full

Choose the appropriate recording mode for when the disk is full:
Overwrite: Cyclically overwrite the earliest video when the disk is full.
Stop: Stop recording when the disk is full.
image.png

Select Local Storage Method
Choose Local Storage in the Storage Method section to save the recorded videos in the internal SD card.

image.png


Apply the Settings

Click Apply to save the local storage configurations.


By following these steps, you can effectively set up and configure local storage on your IPC using the Web 5.0 firmware. This allows for efficient and reliable storage of recorded videos directly on the internal SD card.

Additional Support

For further assistance, please contact our technical support team at support@enssecurity.com or call (888) 397-1999.

    • Related Articles

    • Diamond IPC || How to Set Up FTP Storage on an IPC (Web 5.0) ||

      How to Set Up FTP Storage on an IPC (Web 5.0) This article provides a step-by-step guide for configuring FTP storage on an IPC using the Web 5.0 firmware. The instructions may vary slightly depending on the model and firmware version of the device. ...

    • Diamond IPC || How to Set NAS Storage (WEB 5.0) ||

      How to Set NAS Storage (WEB 5.0) This article provides a step-by-step guide for configuring NAS (Network Attached Storage) on devices using the WEB 5.0 firmware. The instructions may vary slightly depending on the model and firmware version of your ...

    • Diamond IPC || How to configure IP Camera to record to SD Card

      Access the camera’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look like the following: “http://xxx.xxx.xxx.xxx” (Note: If the HTTP port has been changed from default, you will need to add the ...

    • Diamond IPC || How to Set Up Maintenance Function (WEB 5.0) ||

      How to Set Up Maintenance Function (WEB 5.0) This article provides a step-by-step guide for configuring the maintenance function on devices using the WEB 5.0 firmware. The instructions may vary slightly depending on the model and firmware version of ...

    • Diamond IPC || NAS Storage Setup || Web GUI

      Note: NFS and CIFS , both of them are network protocol. NFS runs in Linux/Unix operating system normally. CIFS runs in Windows system normally. Dimond Camera supports NAS which is only based on NFS, so there must be on NFS server to running NFS ...