Diamond Recorder || How to Set Up Voice Alerts for Events on Your NVR ||

How to Set Up Voice Alerts for Events on Your NVR

This article provides a step-by-step guide for setting up voice alerts to be triggered by events on your NVR. The instructions may vary slightly depending on the model and firmware version of your device.

Ensure that:

• The voice files are in MP3 or PCM format.
• The size of each voice file is between 2KB and 10MB.
• Up to 20 voice files can be uploaded to the device.

 

Steps to Set Up Voice Alerts

Upload Voice Files

• Navigate to Main Menu.
• Select Audio.

• Go to File Management.
• Choose Local for the file type.
• Select and add the voice file.
• Click OK to upload.

Set Up Motion Detection: https://enssecurity.lightning.force.com/lightning/articles/Information_Center/Diamond-Recorder-Setting-Up-Motion-Detection-Web-GUI

• Navigate to Main Menu.
• Select Alarm.
• Go to Video Detection.
• Select Motion Detection.

Configure Motion Detection

• Select a camera channel.
• Draw the motion detection region on the screen.
• Enable Motion Detection.
• Configure the sensitivity and threshold:

Sensitivity: Adjust the sensitivity of motion detection (higher sensitivity makes it easier to trigger motion detection).

Threshold: Set the proportion of moving objects relative to the size of the entire monitoring screen (a smaller value makes it easier to trigger the detection).

Enable Alarm Tone

• Check Alarm Tone.
• Select the uploaded audio file for the voice alert.
• Click OK to save the settings.

Notes

When drawing the motion area, you can name the motion detection region for easier identification.

Adjust the sensitivity and threshold settings according to your monitoring needs to optimize detection accuracy.

By following these steps, you can effectively configure your NVR to trigger voice alerts when specific events occur. This enhances your surveillance system by providing audible alerts for important events.

Additional Support

For further assistance, please contact our technical support team at support@enssecurity.com or call (888) 397-1999.

• Related Articles

• Diamond Recorder || How to HW reset NVR/DVR

  Most Diamond XVR and some of the NVR come with HW reset button as shown below. To perform reset on the recorder: 1. Power off the NVR/DVR 2. Press and hold the reset button 3. Power on the NVR/DVR 4. Keep the reset button pressed for about 20 seconds ...

• Diamond Recorder || Trigger MIC Out to Play Audio File on NVR/XVR || Web Client

  Many Diamond series NVR/XVR's can be configured to play audio files through the MIC Out port on the back on the recorder. The MIC Out port is an RCA or BNC port on the back of the recorder and will need to be connected to an amplified device such as ...

• Diamond General || Understanding and Utilizing the Diamond AIoT Console for Enhanced NVR Functionality ||

  Understanding and Utilizing the Diamond AIoT Console for Enhanced NVR Functionality The Diamond AIoT Console is an innovative platform designed to serve as the central hub for AI and IoT data storage, convergence, and control. By integrating these ...

• Diamond General || Controlling Voice Permission of Channels in the Diamond AIoT Console ||

  Controlling Voice Permission of Channels in the Diamond AIoT Console How to Control Voice Permission of Channels in the Diamond AIoT Console In sensitive environments such as banks, the management of voice information is critical due to the ...

• Diamond Recorder || Email Notification from Yahoo || Web GUI

  Go to your Yahoo account and click Account Info. Select Account Security. Scroll down and click on Generate app password. Click Get started. Enter a name. ex Diamond NVR and click Generate password. This password will be used when email notifications ...