Diamond Recorder || Sync IP Camera Time with Recorder || Local GUI
Fix Security Camera Time Sync Issues
Setting the Time and Adjusting the Time Sync
Right-click with your mouse and go to Main Menu > System > General and then choose the Date & Time tab at he top.
Make sure that the date and time, DST (if applicable in your state/territory), and NTP are set up correctly. An example is shown below for Australia. Enter the correct Time Zone (Google for your region’s UTC). Additionally, enter the NTSP (we recommend to use the Windows one or pool.ntp.org). The DST (Daylight Saving Time) for North America and Europe is shown below. So, when the time comes, the machine will modify the time (one hour ahead/back) automatically. Click the Save button after setting the time, then select Apply.
On the next step, go to the Basic tab. Make sure that the CAM Time Sync is enabled, and the interval is set to 1. This means the recorder’s time will synchronize with the camera’s every 1 hour. Select Apply.
Related Articles
Diamond Recorder || Synchronize IP camera time settings with NVR || Web GUI
Synchronize IP camera time settings with NVR Setting the Time and Adjusting the Time Sync Right-click with your mouse and go to Main Menu > System > General and then choose the Date & Time tab at he top. Make sure that the date and time, DST (if ...Diamond Recorder || Recorder Start Up Wizard || Local GUI
1. When you first turn on the recorder you will be greeted with the region settings. Click on the drop down menu and select "United States" and click Next. 2. Select the proper time zone setting for your region. 3. You will now be prompted to input a ...Diamond IPC || Configuring Date and Time on an IP Camera || Web GUI
Note: If your camera is connected to the back of an NVR, you do not need to set the date and time on each camera. The NVR will do that automatically. If you don't have Config Tool yet, you can follow this link: Config Tool When you open Config Tool, ...Emerald Recorder || Recorder Add IP Camera || WEB GUI
Recorder Add IP Camera To access the web client, please use a Windows based PC and use Internet Explorer as the web browser. Access the recorder’s web interface by typing in the IP address on the address bar of Internet Explorer. The path should look ...Diamond Recorder || Tripwire Setup(Local GUI)
Diamond Series Tripwire Setup (Local GUI) 1. From the Main Menu select AI. 2. Select Parameters on the left. Select Smart Plan. 3. Use the drop down box to select the camera channel. 4. Click and highlight IVS (You may need to deselect any other ...