Diamond IPC || Configuring Date and Time on an IP Camera || Web GUI

Diamond IPC || Configuring Date and Time on an IP Camera || Web GUI

Note: If your camera is connected to the back of an NVR, you do not need to set the date and time on each camera. The NVR will do that automatically.

 

  1. If you don't have Config Tool yet, you can follow this link:  Config Tool
  2. When you open Config Tool, you should be able to see the IP camera on there.
    image-1644876804339.png
  3.  Click on the  image-1644875945795.png icon to open Internet Explorer and access your IP Camera.
  4. Login with your username and password.

    image-1644877088963.png

  5. Click on "Setting".

    image-1645110879793.png

  6. Click on System > General > Date & Time

    image-1645111006769.png

  7. Set the date, time, DST, and NTP settings. Click on "Save" when done.

    image-1645111086707.png

    • Related Articles

    • Emerald IPC || How to Set Date and Time on an IP Camera

      1. After you have logged into the remote web interface for the camera, on the banner options go to setup on the left-hand side there should be date and time options available for configurations. 2. Expanding further you can see 2 options for time, ...

    • Diamond Recorder || Synchronize IP camera time settings with NVR || Web GUI

      Synchronize IP camera time settings with NVR Setting the Time and Adjusting the Time Sync Right-click with your mouse and go to Main Menu > System > General and then choose the Date & Time tab at he top. Make sure that the date and time, DST (if ...

    • Diamond IPC || Set Up RTMP on a Diamond IP Camera (WEB 5.0)

      How to Set Up RTMP on an IP Camera (WEB 5.0) Real-Time Messaging Protocol (RTMP) in IP cameras is used for efficient live streaming of audio, video, and data over the internet. It provides low latency streaming for real-time viewing, ensures stable ...

    • Diamond Recorder || Sync IP Camera Time with Recorder || Local GUI

      Fix Security Camera Time Sync Issues Setting the Time and Adjusting the Time Sync Right-click with your mouse and go to Main Menu > System > General and then choose the Date & Time tab at he top. Make sure that the date and time, DST (if applicable ...

    • Diamond IPC || Set IP Camera to Static || Web GUI

      Note: If your IP Camera is connected to the back of an NVR, these instructions will not apply. Download and install ConfigTool The Config Tool should display your IP Camera. Click the, icon to open Internet Explorer and access your IP Camera. Login ...